1.
Queen closer may be placed
2.
The foundation in which a cantilever beam is provided to join two footings, is known as
3.
According to Indian Standards, the 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as
4.
In horizontal (D)P.C, thickness of cement concrete (1 : 2 : 4) is
5.
Pile foundations are suitable for
6.
The inclined support at the ends of treads and rises of a stair, is known as
7.
The process of making the back ground rough, before plastering, is
8.
Black cotton soil is unsuitable for foundations because its
9.
The entrained concrete is used in lining walls and roofs for making
10.
In case of multi-storeyed buildings, the forms to be removed first are
11.
The number of steps in a flight generally should not be less than
12.
The bearing capacity of a water logged soil can be improved by
13.
A cut in frame of a door to receive the shutter, is called
14.
The alignment of a cross joint along the plumb line is
15.
A temporary rigid structure having platforms to enable masons to work at different stages of a building, is known as
16.
The type of bond in which every course contains both headers and stretchers, is called
17.
Pile foundation is generally provided if soil is
18.
The concrete slump recommended for columns, is
19.
The inner section of a cavity wall, is generally known as
20.
To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as
21.
A stair should not have pitch more than
22.
A stair should not have pitch less than
23.
Raft foundation are generally preferred to when the area required for individual footing, is more than
24.
The type of footing which is used to transmit heavy loads through steel columns is
Sign In 
good