1.
The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known
2.
The number of horizontal cross wires in a stadia diaphragm is
3.
Total latitude of a point is positive if it lies
4.
Hydrographic surveys deal with the mapping of
5.
One of the tacheometric constants is additive, the other constant, is
6.
Accuracy of 'fix' by two point problem, is
7.
True meridians are generally preferred to magnetic meridians because
8.
For the construction of highway (or railway)
9.
Magnetic bearing of a survey line at any place
10.
Perpendicularity of an offset may be judged by eye, if the length of the offset is
11.
Greater accuracy in linear measurements, is obtained by
12.
From any point on the surface with a given inclination
13.
Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point
14.
Reduced bearing of a line is an angle between
15.
The combined effect of curvature and refraction over a distance L kilometers is
16.
Number of links per metre length of a chain are
17.
The line normal to the plumb line is known as
18.
Planimeter is used for measuring
19.
If the chain line which runs along N-S direction is horizontal and the ground in E-W direction is sloping
20.
Determining the difference in elevation between two points on the surface of the earth, is known as
21.
Contours of different elevations may cross each other only in the case of
22.
In case of a direct vernier scale
23.
If the angular measurements of a traverse are more precise than its linear measurements, balancing of the traverse, is done by
24.
Pentagraph is used for
25.
The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known
26.
n levelling operation
*
Note
most important question
Thank you sir🙏❤️